MANUFACTURING ANALYSIS
Know the part.
Before you make it.
Turn a CAD file into dimensions, manufacturing insights and a clear view of what needs attention. Fast enough to keep the quote moving. Thorough enough to start a better conversation.
See your parts in ArcphaseManufacturing Analysis
sensor-mount.step
96 × 64 × 62 mm
Build Size
Fits the selected machine build volume.
Wall Thickness
Cable guide: 0.7 mm · minimum 0.8 mm.
Holes
Ø6.6 mm mounting holes · minimum 1.5 mm.
Trapped Volume & Drainage
No enclosed powder-trapping cavities detected.
Warping Risk
No elevated warping risk detected.
LESS WAITING. MORE QUOTING.
The CAD is complicated.
The wait shouldn’t be.
Our recorded fixture benchmarks put median analysis time under two seconds for both STEP and mesh files. Get useful answers while the part is still the topic of conversation.
Median · 48 benchmark parts
Median · 52 benchmark parts
FROM FILE TO INSIGHT
Built to keep up
with your quoting.
Start reviewing geometry and manufacturing risks without handing every file to a specialist first.
About these benchmarks
Recorded internal analysis baselines across 48 STEP and 52 mesh fixtures, August 2026. Medians are 747 ms and 1,341 ms respectively. These measure analysis work, not the full upload-to-results journey; loading, transfer, queueing and viewer preparation can add time. File complexity and hardware affect results. They are benchmark results, not a turnaround guarantee.
MORE THAN A PRETTY PREVIEW
Your CAD has a lot to say.
We help you read it.
Understand the shape, the features and the manufacturing implications before the order reaches the shop floor.
Size it up.
Read dimensions, volume and surface area straight from the file. Bring geometry into quoting without another round of manual measurements.
Recognize the details.
Find holes, pockets, fillets and chamfers in STEP geometry. Give reviewers a head start on the features that make a part simple—or interesting—to produce.
Spot the awkward bits.
Check thin walls, small holes, support needs and trapped material. Put the potential problem on the model, where someone can actually do something about it.
THE PROCESS CHANGES THE ANSWER
Same part.
Different rules.
A wall that works for one process may need another look for the next. Arcphase evaluates findings against the selected manufacturing process and material, so the guidance belongs to the quote you’re actually preparing.
Switch the process in this example to see the wall requirement change.
- Process / material
- SLS · Nylon PA12
- Cable guide wall
- 0.70 mm
- Minimum requirement
- 0.80 mm
Thin wall to review SLS
CAD OR MESH. ONE REVIEW WORKFLOW.
Bring the file you have.
Get the insight you need.
Work with native STEP geometry or mesh uploads without asking your customer to become a file-format expert.
STEP / STP
Keep the shape’s intelligence.
Read the original surfaces and features: holes, pockets, rounded edges and more. Connect manufacturing findings to the geometry they describe.
MESH FILES
More than triangles.
Extract dimensions and volume, assess wall thickness and holes, and look for support needs and trapped material—even when the file arrives as a mesh.
Bring the findings into the customer portal and staff review. Keep the conversation attached to the part, from the first quote onward.
Explore the portalCONNECTED BY ARCPHASE